MFH2000R-10-5T 2in Milling Cutter
- Item Code: KYO THN07821
- Availability:
- Unit Size: 1
Description
Tech Specs
Back To Top[APMX] Maximum Depth of Cut (Decimal Inch) | 0.0591 (GM), 0.0591 (GH), 0.1378 (LD), 0.0591 (FL) |
---|---|
[APMX] Maximum Depth of Cut (mm) | 1.50 (GM), 1.50 (GH), 3.50 (LD), 1.50 (FL) |
[APMX2] Maximum Depth of Cut 2 (Decimal Inch) | 0.0472 |
[APMX2] Maximum Depth of Cut 2 (mm) | 1.2 |
[CBDP] Connection Bore Depth (Decimal Inch) | 0.9469 |
[CBDP] Connection Bore Depth (mm) | 24.05 |
[DC] Cutting Diameter (Decimal Inch) | 1.3311 - 2.0000 |
[DC] Cutting Diameter (mm) | 33.81 - 50.80 |
[DCB] Connection Bore Diameter (Decimal Inch) | 0.75 |
[DCB] Connection Bore Diameter (mm) | 19.05 |
[DCCB1] Connection Counterbore Diameter 1 (Decimal Inch) | 0.6689 |
[DCCB1] Connection Counterbore Diameter 1 (mm) | 16.99 |
[DCCB2] Connection Counterbore Diameter 2 (Decimal Inch) | 0.433 |
[DCCB2] Connection Counterbore Diameter 2 (mm) | 11 |
[DCSFMS] Contact Surface Diameter Machine Side (Decimal Inch) | 1.75 |
[DCSFMS] Contact Surface Diameter Machine Side (mm) | 44.45 |
[GAMF] Rake Angle Radial (Degree) | -5 |
[GAMP] Rake Angle Axial (Degree) | 10 |
[KAPR] Tool Entering Angle (Degree) | 10 |
[KDP] Keyway Depth (Decimal Inch) | 0.187 |
[KDP] Keyway Depth (mm) | 4.75 |
[KWW] Keyway Width (Decimal Inch) | 0.313 |
[KWW] Keyway Width (mm) | 7.95 |
[LF] Functional Length (Decimal Inch) | 1.9689 |
[LF] Functional Length (mm) | 50.01 |
[RMPX] Maximum Ramping Angle (Degree) | 2.5 |
ANSI Part Number | MFH2000R105T |
Application | Facing|Helical Milling|Plunging|Ramping|Shouldering|Slotting |
Bore Diameter (Inch/Metric) | Inch |
Compatible Insert Hand | Right-Hand |
Compatible Inserts (Full) | SOMT100420ER-GM, SOMT100420ER-GH, SOMT100420ER-LD, SOMT100420ER-FL |
Compatible Inserts (Partial) | SOMT10� |
Coolant Through (Yes/No) | Yes |
Hand | Right-Hand |
Insert Holding Method | Screw |
Integral Arbor (Yes/No) | No |
ISO Part Number | MFH2000R-10-5T |
Material | Steel |
Maximum RPM | 10000 |
Multi-Use Tool (Yes/No) | Yes |
Number of Flutes | 5 |
Number of Inserts | 5 |
Series | MFHR |
Tool Style | MFH |
Unit (inch/mm) | inch |